Speco Technologies Security Camera CVC624WDR User Manual

Wide Dynamic Range  
Dome Camera  
CVC624WDR  
200 New Highway  
Amityville, NY 11701  
631-957-8700  
 
CONTENTS  
Package Contents  
Precautions  
4
5
Camera Installation  
6-7  
Features  
8
9
OSD Menu Tree  
OSD Menu Details  
10-12  
Troubleshooting  
Specifications  
13-14  
15  
Dimensions  
Warranty  
16  
17  
3
 
PACKAGE CONTENTS  
Please make sure that the following items are included  
in the package:  
1 CVC624WDR Camera  
2 Mounting Screws  
1 Video Test Connector  
Please leave this manual with the end-user for future  
reference.  
COMPATIBILITY  
“A” type Box  
DFM Series  
Electrical Box is not included in the package but  
Is compatible with the camera  
4
 
PRECAUTIONS  
THIS CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED  
PERSONNEL  
TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE  
PROPER POWER CABLE  
DO NOT CLEAN THE DOME COVER WITH AN ABRAISIVE  
CLEANING MATERIAL - PLEASE USE A SOFT CLOTH OR  
TISSUE TO CLEAN THE DOME COVER  
THERE ARE NO USER-SERVICEABLE PARTS INSIDE.  
PLEASE DO NOT DISASSEMBLE THIS CAMERA OTHER THAN  
TO MAKE INITIAL ADJUSTMENTS  
PLEASE USE A UL APPROVED REGULATED 12 VOLT DC  
POWER SUPPLY  
PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE  
TO PREVENT FIRE OR ELECTRICAL SHOCK  
PLEASE INSURE THAT YOUR INSTALLATION AREA CAN  
SUPPORT THE WEIGHT OF THE CAMERA  
PLEASE HANDLE THIS CAMERA CAREFULLY:  
- DON’T USE A STRONG OR ABRASIVE DETERGENT WHEN  
CLEANING THE CAMERA.  
- DON’T EXPOSE THE CAMERA TO DIRECT SUN  
5
 
CAMERA INSTALLATION  
CONNECT POWER CABLE  
1. WHEN USING 12 VOLTS DC (constant voltage 500 mA)  
Power Input :RED  
Center : (+)  
DC 12V Power Supply  
2. CONNECT VIDEO CABLE  
-CONNECT BNC CABLE TO THE BNC JACK.  
6
 
CAMERA INSTALLATION  
MECHANICAL  
(2) JOY STICK  
(1) Vari-focal Lens  
(3) Video Test Terminal  
(1) VARI-FOCAL LENS  
Adjust between TÅÆW (TELE ÅÆ WIDE) to set the  
angle (focal length). Set the focus by adjusting ÅÆN  
NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED  
INTO POSITION THROUGH THE USE OF "LOCKING HANDLES".  
(2) JOY STICK  
TO SET THE OSD (ON SCREEN DISPLAY) , PRESS THE JOY  
STICK FOR ONE SECOND AND SET AS DESCRIBED  
IN THE MANUAL  
(3) VIDEO TEST TERMINAL  
7
 
FEATURES  
1. Superior Wide Dynamic Image Quality  
It has very Wide Dynamic Range by using the Pixim ORCA Chip Set.  
Film-like colors are achieved under various Light conditions even in  
High Dynamic range scenes , Dynamic Range achieves a maximum  
of 120dB.  
2. Digital Pixel System  
Each pixel is processed independently to get clear and usable  
images.  
3. OSD control  
Every function is controlled by OSD menu  
- Automatic white balance  
- Automatic gain control (max 60dB)  
- Slow shutter, AGC on/off  
- Line lock phase control  
- Lens type control  
- Auto exposure control  
4. High Resolution  
540 lines of horizontal resolution and 460 lines of vertical resolution.  
** Pixim and Digital Pixel System are registered trademarks of  
Pixim, Inc.  
8
 
OSD MENU TREE  
SPECO MAIN MENU  
PRESETS  
DEFAULT / INDOOR / OUTDOOR / CUSTOM  
SET UP ID  
DISPLAY ID : (OFF / ON)  
CAMERA ID : 8 CHARACTER  
ID POSITION : (UP-LEFT  
/
UP-CENTER / UP-RIGHT  
DOWN-LEFT  
/
DOWN-RIGHT)  
LENS SELECT  
WDR  
DC  
MANUAL  
AUTO  
OFF  
MANUAL : (WDR BIAS Range -20 to 20 / WDR RANGE 0 to 36)  
WB CONTROL  
ATW(Range 2K~11K)  
AWB  
MANUAL (Range 2K ~11K)  
LOW LIGHT  
SPECIAL  
SLOW SHUTTER : (SHUTTER LIMIT Range OFF~X32  
AUTO D/N  
/
AGC CONTROL Range 0 to 60)  
VIDEO : (NTSC / PAL)  
FLIP : (OFF / ON)  
SYNC : (L,LOCK / INT / INT2)  
BACK LIGHT : (OFF / ON : BACK LIGHT ZONES)  
RESOLUTION : (NORMAL / HIGH / C_NORMAL / C_HIGH)  
COLOR MODE : (COLOR / B/W)  
SHARPNESS : ON (Range -8 to 8) / OFF  
EXIT MENU  
EXIT NO CHANGE  
SAVE NEW AND EXIT  
RESTORE FACTORY SETTING  
RELEASE VERSION  
9
 
OSD MENU DETAILS  
1. OSD MENU ENTER / EXIT  
A. OSD MENU ENTER  
• Push Center Key for 2 seconds  
B. OSD MENU EXIT  
• Press EXIT Menu from Main Menu  
• If Pressing Set Key for 2 seconds from Main Menu appears.  
In this case, just press Set Key.  
C. 'SAVE' and 'QUIT‘  
• Left or Right Key - Selecting Menu  
• Up or Down Key - Returning to Menu  
1. Press the SET key to access the main setup mode.  
2. Select the desired feature using the UP or Down key.  
3. Change the status of the selected feature using the LEFT or  
RIGHT key.  
2. MAIN MENU  
A. PRESETS  
• DEFAULT : Optimized for normal scenes  
• INDOOR : Optimized for indoor scenes with windows and/or  
glass door to capture details both indoors and outdoors.  
• OUTDOOR : Optimized for sunny outdoor scene to capture detail  
both in bright areas and shadows.  
• CUSTOM : Change the value of the customer.  
B. SETUP ID  
• DISPLAY ID  
- ON :The ID name will displayed in the monitor.  
- OFF : The name will not displayed in the monitor.  
• CAMERA ID : Enter up to 8 characteristic.  
• ID POSITION : Select the screen position of the camera ID.  
10  
 
OSD MENU DETAILS  
C. LENS  
• MANUAL : Use Manual lens Only.  
D. WDR  
• WDR (Wide Dynamic Range) : You can adjust the desired WDR  
BIAS from -20 to 20 and WDR RANGE from 0 to 36  
E. WB CONTROL  
• ATW (Auto Tracking White Balance) : The camera automatically  
control the white balance in any environment.  
• AWB (Auto White Balance) : The white balance is automatically  
adjusted in a specific environment.  
• MANUAL : Users can adjust the colors by adding or reducing the  
WB level. You can adjust the desired WB level from 2K to 11K.  
F. LOW LIGHT  
• SLOW SHUTTER : Control Image brightness by adjusting shutter  
Speed, You can adjust the desired shutter speed from off to X32.  
- AGC : ON (You can adjust the desired AGC level from 0 to 60dB)  
or OFF (Deactivate automatic gain control feature)  
• AUTO D/N : AUTO DAY/NIGHT  
G. SPECIAL  
• VIDEO : NTSC or PAL SELECTION  
• FLIP : HORIZONTAL REVERSE (OFF or ON)  
• SYNC  
- INTERNAL : Internal synchronization  
- INTERNAL2 : Internal synchronization (Color Rolling Mode)  
- LINE LOCK : Phase adjustment may be necessary in multiple  
camera installations to prevent picture roll
 
when switching  
between cameras  
11  
 
OSD MENU DETAILS  
• BACK LIGHT : BACK LIGHT ADJUST or SELECT AREA  
• RESOLUTION : Select Resolution of CCD or PIXIM  
• COLOR MODE : COLOR or B/W SELECTION  
• SHARPNESS : ON (You can adjust the desired Sharpness form -  
8 to 8) or OFF  
H. EXIT MENU  
• EXIT NO CHANGES : No change  
• SAVE NEW AND EXIT : Save change  
• RESTORE FACTORY SETTINGS : Factory default  
• RELEASE VERSION  
I. PREVIOUS PAGE  
• PREVIOUS PAGE : Return page  
s patented Digital Pixel System (DPS) technology Marks  
Pixim’  
a fundamental breakthrough in imaging Technology.  
Building upon technology developed at Stanford University in the 1990s,  
Pixim has created An image capture and processing system that provides  
High-quality pictures with enhanced dynamic Range that significantly  
improves image quality in Scenes consisting of both bright and dark areas.  
The core invention in DPS is the inclusion of an Analog-to-digital converter  
(ADC) within each pixel of the image sensor.  
The ADC translates the light Signal into a digital value at the immediate  
point of Capture, thus minimizing signal degradation and cross-talk in the  
array and allowing for greater noise Reduction methods.  
Once the data is captured in a Digital format, a variety of digital signal  
processing Techniques are used for optimal image reproduction.  
12  
 
TROUBLESHOOTING  
If you have trouble operating your camera, refer to the following  
Problem  
Solution  
Nothing appears on  
the screen.  
Check that the power cord and line connection  
between the camera and monitor are correct  
Check that you have properly connected VIDEO  
cable to the camera VIDEO output jack.  
The image on the  
screen is dim.  
Is the lens stained with dirt? Clean your lens with  
soft clean cloth.  
Set the monitor for the proper conditions.  
If the camera is exposed to too strong light  
change the camera position.  
Adjust the lens’ focus.  
The image on the  
screen is dark.  
Adjust the contrast feature of the monitor.  
If you have an intermediate device, set the  
75/Hi-z properly.  
The camera is not  
Check that you have properly connected  
working properly,  
and  
the camera to an appropriate power source.  
the surface of the  
camera is hot.  
MOTION DETECTION  
function is not active.  
Have you set ‘MOTION DET.’ menu to off?  
Have you set ‘MD LEVEL’ to too low?  
Have you set ‘MD AREA’ properly  
13  
 
TROUBLESHOOTING  
Problem  
Solution  
The color of the  
picture is not  
proper.  
Check that you have properly set the  
‘ WHITE BALANCE ’ menu  
The image on the  
screen flickers.  
Is the camera facing to direct sunlight or fluorescent  
lighting? Change the camera position.  
14  
 
SPECIFICATIONS  
Signal System  
Pick-up Device  
NTSC  
1/3 inch Pixim ORCA CMOS (Dramatic  
Dynamic range sensor)  
Total of pixels  
742(H) x 552(V)  
Horizontal Resolution  
Vertical Resolution  
Scanning System  
Synchronization  
Video Output  
540 Horizontal TV Lines (color)  
460 VTVL  
525 Iines interlaced / 625 Iines interlaced  
Internal  
1.0Vp-p/75 ohm Composite  
0.08Lux (DSS on) with F1.2 Lens  
53dB or more  
Sensitivity  
S/N Ratio  
Dynamic range  
Shutter Speed  
120dB(max), 102dB(typical)  
1/60 - 1/100,000 / 1/50 - 1/100,000  
2.8~12mm Vari-focal Lens  
0 - 60dB  
Lens  
AGC Control  
Joy-Stick Switch  
OSD Menu Control  
Voltage Requirements  
Power Consumption  
Operating Temperature  
Storage Temperature  
Operating Humidity  
Storage Humidity  
DC 12V (8V – 18V)  
Max 2.7W  
-14°F ~ 122°F  
-4°F ~ 158°F  
Under 90% Non-condensing  
under 95% Non-condensing  
15  
 
DIMENSIONS  
* SIDE VIEW  
* TOP VIEW  
16  
 
WARRANTY  
17  
 
MEMO  
 
MEMO  
 
200 New Highway  
Amityville, NY 11701  
631-957-8700  
Rev. 100317  
Speco Technologies is constantly developing product improvements.  
We reserve the right to modify product design and specifications without notice  
and without incurring any obligation.  
 

Servis Rhino Compact Loader 2409TL User Manual
Singer Sewing Machine 142W25 User Manual
Sonance Stereo System C4630 SE User Manual
Sony CD Player CDX 4170R User Manual
Sony DVD Player DAV DZ20 User Manual
Sony Ericsson Cell Phone K858C User Manual
Sylvania MP3 Player SMPK7954 User Manual
Sylvania Portable Stereo System SRCD237 User Manual
Sylvania TV DVD Combo SRTD420 User Manual
Tanita Scale HD 332 User Manual